Sanyo MCO-5M - Specifications

99
43
SPECIFICATIONS
Name Multi-gas Incubator
Model MCO-5M
External dimensions W480 x D548 x H575 (mm)
Internal dimensions W350 x D378 x H375 (mm)
Interior volume 49 L
Exterior Painted steel
Interior Stainless steel containing copper (R corner structure)
Outer door Painted steel,
Reversible support (selectable right or left-hand door)
Inner door Tempered glass
Tray Made of stainless steel containing copper (standard 3 trays , maximum 6 trays )
W310 x D310 x H12 (mm), Maximum load; 4 kg/tray
Access port Inner diameter; 30 mm, On the back side
Insulation Rigid polyurethane foamed-in place (CFC-FREE)
Heating system Direct Heat & Air (DHA) jacket system
Heater 180W
Humidifying system Natural evaporation with humidifying pan
Temperature controller PID control system
Temperature display Digital display
CO
2
controller PID control system/TC sensor(direct detection in chamber)
CO
2
density display Digital display
O
2
controller PID control system/Zirconia sensor(direct detection in chamber)
O
2
density display Digital display
Air circulation Fan assisted
Air filter
0.3μm, Efficiency; 99.97% or more
Water level sensor
Optical type
Alarm
High/Low temperature alarm, CO
2
density alarm, O
2
density alarm
Door alarm, Upper limit temperature alarm
Remote alarm contact Allowable contact capacity: DC 30 V, 2 A
CO
2
inlet connection 4 to 6 mm diameter tube
CO
2
inlet pressure 0.03MPaG (0.3kgf/cm
2
G, 4.3psiG)
O
2
inlet pressure 0.05MPaG (0.5kgf/cm
2
G, 7.1psiG)
Accessories Power supply cord ,3 trays, 3 gas tube, 1 humidifying pan,
Stacking plate A and B, 4 protective stickers, 6 tube bands
1 injection nozzle, 1injection nozzle tube
Weight 50 kg
Optional accessory
Self-contained CO
2
cylinder changeover system (MCO-5GC)
Extra tray (MCO-30ST) , CO
2
cylinder regulator (MCO-100L)
UV system kit (MCO-18UVS2), Roller base (MCO-5RB)
Maximum power
consumption
205 W
110 to 120 V, 60 Hz 220 V, 60 Hz 220 to 240 V, 50 Hz
Total maximum
current
1.8 A 0.9 A 0.9 A
Note: Design or specifications will be subject to change without notice.
The ballast is not user replaceable part. Please contact a qualified service personnel.