Sanyo MCO-5M - PRECAUTIONS FOR SAFE OPERATION; INCUBATOR COMPONENTS; INSTALLATION; OPERATING INSTRUCTIONS

57
1
Note:
1. No part of this manual may be reproduced in any form without the expressed written
permission of SANYO.
2. The contents of this manual are subject to change without notice.
3. Please contact SANYO if any point in this manual is unclear or if there are any
inaccuracies.
SANYO Electric Biomedical Co., Ltd. All rights reserved. Printed in Japan.
CONTENT
PRECAUTIONS FOR SAFE OPERATION P. 2
CAUTIONS FOR USAGE P. 7
Labels on the unit P. 9
INCUBATOR COMPONENTS P.11
Control panel and keypad P.13
Remote alarm terminal P.15
INSTALLATION
Installation site P.16
Prevent contamination P.17
Installation P.17
BEFORE COMMENCING OPERATION
Sterilizing of chamber and attachments P.18
Connection of N
2
( or O
2
) gas cylinder P.19
Connection of gas injection nozzle P.20
Connection of CO
2
gas cylinder P.21
OPERATING INSTRUCTIONS
Set of chamber temperature and CO
2
density P.22
UV lamp P.23
Change of setting of UV lamp ON period P.24
Automatic gas cylinder changeover P.25
Key lock function P.27
Water level sensor P.28
ALARMS & SAFETY FUNCTIONS P.29
Operation after power failure P.30
SETTING OF ALARM RESUME TIME P.31
ROUTINE MAINTENANCE
Sterilizing of chamber and attachments P.32
Removal of attachments P.33
Filling the humidifying pan P.35
CALIBRATION
Temperature calibration P.36
CO
2
calibration P.37
O
2
calibration P.38
TROUBLESHOOTING P.39
ENVIRONMENTAL CONDITIONS P.40
DISPOSAL OF UNIT P.40
STACKED MODULE P.41
SPECIFICATIONS P.43
PERFORMANCE P.44
SAFETY CHECK SHEET P.45