- 84 -
20
RUNNING OPERATION (MENU/Set)
Alarm delay time setting (Alarm Delay)
The setting range for delay time is between 0 and 15 minutes. I When 0 is set, the alarm buzzer sound
without delay. The factory setting is 15 minutes. Table 4 shows the basic procedure for setting the
alarm delay time. (Example: Alarm delay time is changed from 15 minutes to 10 minutes.)
Table 4. Procedure for setting alarm delay time (Change from 15 minutes to 10 minutes)
Description of operation Key operated Indication after operation
1 ----- The top screen displayed
2 Press the MENU key. MENU
The menu window is indicated. And the
“set” is highlighted.
3 Press the ENTER key. ENTER
The temp. setting window indicated. And
current chamber temperature is
highlighted.
4
Select Alarm Delay item pressing
Shift keys.
The set value 15 of the alarm delay time
(Alarm Delay) is highlighted.
5
The number input key is pressed in
order of 1 ĺ 0.
Alarm delay time (ALARM Delay) is
changed from 15 to 10.
6 Press the MENU key. MENU
The menu window is indicated. And the
“OK” is highlighted.
7 Press the ENTER key. ENTER
Alarm delay time is memorized, and the top
screen window is indicated.
Note:
The high temperature alarm / low temperature alarm set mode returns to the temperature display mode
automatically when 90 seconds has passed without any key operation. And, high temperature alarm /
low temperature alarm setting value is not memorized.
1
0
To Next Page
Loading...
