- 90 -
26
VARIOUS SETTING (MENU/Log)
The operation of the hyper-terminal on the PC side (In case of Windows 2000 and XP)
When this function is used, an optional interface board is necessary. Contact Sanyo sales
representative or agent at the time of installation of the optional parts.
1. Start a program-accessories-communication-hyper-terminal from the starting button. The registration of
the starting menu is to start in the following method, C : Start from ¥Program Files¥ Windows
NT¥hypertrm.exe.
2. Set up the following through the hyper-terminal screen.
ƔNew connection Name (Example) Sanyo
ƔSetup of the connection Connection port COM1
ƔProperties of COM1 Setup of the port
ƔBit/sec.: 9600 Data bit: 8 Parity: No Stop bit: 1 Flow control: Xon/Xoff
(When a log transmitting screen is opened, terms of communication on the MDF side are set on the
above condition automatically.)
3. Data transmitting screen is displayed. Specify a transfer, a capture of the textbook and a preservation
file name by the operation on the PC side hyper-terminal. Specify the extension of the preservation file
name with txt or csv.
4. Operation on the product side presses a menu key (MENU) according to process of P24 more than a
Log screen. Then, it is made to indicate a menu window. Then, choose Start, and press an enter key
(ENTER). Transmission is started.
5. The transmission is finished, with “Finished” indication.
To Next Page
Loading...
