- 37 -
14
STABLE RUNNING
Table 1 shows the basic procedure for setting the chamber temperature. Perform key operations in the
sequence indicated in the table. The example in the table is based on the assumption that the desired
temperature is 37
o
C and continuous running.
Note: The unit is set at the factory that the delay
timer is OFF, the chamber temperature is 0
o
C , the
running time is ever on, and the timer mode is normal
mode.
Table 1: Basic operation sequence (Example: Chamber temperature; 37
o
C, Continuous running)
Description of operation Key operated Indication after operation
1 Press the power key.
The current chamber temperature is displayed.
2 Press the delay timer key.
The current delay time is displayed.
3
Press the delay timer key to reset
the delay time.
Reset the delay time.
4 Press the delay timer key
The current chamber temperature is displayed.
5 Press the call key.
The third digit of the temperature indicator flashes.
6
Set the temp. to 37.0 with the digit
shift key and the numeric value
shift key.
9 Press the run/stop key.
The setting mode is finished and the unit runs.
POWER
DELAY
DELAY
DELAY
CALL
RUN
STOP
Time
37
o
C
To Next Page
Loading...
