PDG-DXT10L
- 44-
5. Adjustment
5-1 Step of Into Service mode
Step1
To enter the service mode (Expert) take the one of the following methods.
- Press the “Menu” key on the projector for more than 10 seconds and then press the “Select” key
on the projector for more than 10 seconds.
- Press and hold the “Menu” key on the remote control for more than 20 seconds.
To return to the normal mode, press the “Power ON/Standby” key.
Step2
Open Main menu and select “Expert ” item to enter
the expert menu as right side picture.
To Next Page
Loading...
