Sanyo PDG-DXT10L - LED State Indications

PDG-DXT10L
- 16-
3-3. LED State Indications
Power LED
Projector Status LED Condition LED Sequence Projector Condition
AC Off
BLANK
OFF
Cooling
ORANGE BLINK
0.5sON > 0.5sOFF After Power OFF
Power up sequence
GREEN BLINK
0.5sON > 0.5sOFF Start up
Standby / Idle
ORANGE ON
ON
Power ON
GREEN ON
ON
Status LED
Projector Status LED Condition LED Sequence Projector Condition
Normal Condition
BLANK
OFF Power ON
Cover ERROR
RED 1 time BLINK (repeatlly)
0.5sON > 2.5sOFF ERROR
Temperature ERROR
RED 2 times BLINK (repeatlly)
(0.5sON > 0.5sOFF) * 2 > 2.0sOFF ERROR
Power ERROR
RED 3 times BLINK (repeatlly)
(0.5sON > 0.5sOFF) * 3 > 2.0sOFF ERROR
FAN ERROR
RED 4 times BLINK (repeatlly)
(0.5sON > 0.5sOFF) * 4 > 2.0sOFF ERROR
Keylocked (when push key)
ORANGE light up
ON Keylock function enable
Idle
GREEN ON
ON
Lamp LED
Projector Status LED Condition LED Sequence Projector Condition
Lamp Off
BLANK
OFF All Time
End of the Lamp life
RED BLINK
0.5sON > 0.5sOFF All Time (Lamp replace)
NO LAMP
RED 1 time BLINK (repeatlly)
0.5sON > 2.5sOFF ERROR
Lamp ERROR
RED 6 times BLINK (repeatlly)
(0.5sON > 0.5sOFF) * 6 > 2.0sOFF ERROR
Cooling Lamp
ORANGE BLINK
0.5sON > 0.5sOFF Switching Lamp1 & 2
Re-Light up sequence
GREEN BLINK
0.5sON > 0.5sOFF Start up
Lamp life Over (Cannot lamp on)
RED ON
ON All Time (Lamp replace)
Eco mode
ORANGE ON
ON Power ON
Normal mode
GREEN ON
ON Power ON