Sanyo PLC-XL51 - Page 21

- 21 -
2. Remove the 2 DEC Legs.
3. Remove the 2 screws-B (M3x35).
4. Remove the 2 Stand Legs and Cap Stand Legs.
DEC Leg
B
B
DEC Leg
Stand Leg
Cap Stand Leg
Stand Leg
Cap Stand Leg
Stand Plate
Stand (accessory) Removal.
5. Remove the 3 screws-C (M4x25) and remove the Stand.
C
C
C
Stand
Mechanical disassemblies