To Next PageTo Next Page
Need help?Do you have a question about the Sanyo PLC-XT25 and is the answer not in the manual?
General| Projection technology | LCD |
|---|---|
| Contrast ratio (typical) | 1000:1 |
| Projector native resolution | XGA (1024x768) |
| Resolution | 1024 x 768 pixels |
| Dimensions (WxDxH) | 302 x 422 x 162 mm |
| Display diagonal | 1 \ |
| Lamp type | UHP |
| Lamp power | 300 W |
| Light source type | Lamp |
| Market positioning | Portable |
Weight and Dimensions| Weight | 9200 g |
|---|
Details essential safety measures and precautions to observe during servicing.
Highlights warnings and precautions specifically for service personnel.
Explains various circuit protection mechanisms like fuses, thermostats, and sensors.
Covers cleaning the air filter, resetting counters, and replacing the projection lamp.
Procedure for removing the LCD panel/prism assembly with an important notice.
Table detailing adjustments needed after replacing specific projector components.
Provides guidance and necessary tools for performing optical adjustments.
Detailed steps for adjusting the optical axis of the projector.
Covers contrast adjustments for POL and WV using specific levers and screws.
Explains how to enter and navigate the service adjustment menu.
Details various circuit adjustments including fan voltages and panel type settings.
Provides locations of test points and service adjustment data tables.
Provides a method for diagnosing power failures using an RS-232C serial port.
Provides instructions for cleaning internal components using air spray.
Details the method for cleaning optical parts after disassembly.
Provides disassembly steps and notes for the LCD panel/prism assembly.
