Need help?Do you have a question about the Sanyo PLC-XTC50L and is the answer not in the manual?
General| Brightness | 5000 lumens |
|---|---|
| Resolution | 1024 x 768 (XGA) |
| Contrast Ratio | 2000:1 |
| Lamp Life | 2000 hours (Normal Mode), 3000 hours (Eco Mode) |
| Display Type | LCD |
| Throw Ratio | 1.7-2.1:1 |
| Projection System | 3LCD |
| Lamp Type | UHP |
| Screen Size | 40" - 300" |
| Zoom Ratio | 1.2x |
| Input Connectors | S-Video |
| Noise Level | 31 dB (Eco mode) |
Essential safety advice and warnings for operating the projector, including ventilation and handling precautions.
Guidelines for ensuring proper airflow around the projector to prevent overheating and maintain performance.
Instructions and importance of cleaning or replacing the projector's air filter to ensure optimal cooling.
Guidance on positioning the projector correctly to avoid reduced lamp life, accidents, or fire hazards.
Steps to power on the projector, including initial display and PIN code entry if enabled.
Procedure for safely powering down the projector, including cooling down the lamp and fan.
How to select the input source using the remote control or the projector's top control buttons.
Detailed steps for selecting input sources and signal formats through the on-screen menu.
How to automatically detect or manually select computer signal formats (VGA, SVGA, XGA etc.) for optimal display.
Automatically adjusts sync, dots, and positions for optimal computer image display via button press or menu.
Manually adjust image parameters like Fine sync, Total dots, Horizontal/Vertical positions for specific computer signals.
Adjust Contrast, Brightness, Color, Tint, and White Balance (Red, Green, Blue) for optimal picture quality.
Detailed information on filter function, replacement icons, and precautions for maintaining filter effectiveness.
Step-by-step guide for replacing the projector's filter cartridge, including cautions and recommendations.
Step-by-step instructions for replacing the projector lamp, including safety precautions and cooling times.
Critical safety guidelines and warnings for handling projector lamps, including risks of explosion and injury.
Explanation of projector status indicators (WARNING TEMP/FILTER, POWER) and troubleshooting steps.
Solutions for common projector problems, including no power, no image, and distorted display issues.
Addresses issues with wireless mouse, remote control, indicators, and unlocking security features.
Table correlating indicator lights with projector conditions, helping diagnose operational states and issues.
Interpreting warning indicators like TEMP, FILTER, and LAMP REPLACE when the projector detects abnormal conditions.
To Next Page
