Sanyo PLC-XTC50L User Manual

31
Press the P-TIMER button on the remote control. The P-Timer
display “00:00” appears on the screen and the countdown
starts (00:00–59:59).
To stop the countdown, press the P-TIMER button. To cancel
the P-Timer function, press the P-TIMER button again.
P-TIMER button
P-Timer display
Note:
 s3EETHEPREVIOUSPAGEFORTHE
DESCRIPTIONOFOTHERBUTTONS
Remote Control
SHUTTER
button
P-TIMER
button
Reduce the upper width
with the Point
! button.
Reduce the lower width
with the Point
button.
KEYSTONE button
KEYSTONE
button
Basic Operation
SHUTTER button
Press the KEYSTONE button on the remote control. The
“Keystone” appears on the screen.
Use the Point !  buttons to correct keystone
distortion. The keystone adjustment can be stored
(p.45).
s4HEWHITEARROWSINDICATETHATTHEREISNOCORRECTION
s!REDARROWINDICATESTHEDIRECTIONOFCORRECTION
s!NARROWDISAPPEARSATTHEMAXIMUMCORRECTION
s)FYOUPRESSTHE+%934/.%BUTTONONTHEREMOTE
control again while the Keystone dialog box is being
displayed, the keystone adjustment will be canceled.
s4HEADJUSTABLERANGECANBELIMITEDDEPENDINGONTHE
input signal.
sh+EYSTONEvDISAPPEARSAFTERSECONDS
See pages 28 and 56 for details.
Reduce the left part with
Point
button.
Reduce the right part with
Point
 button.
Downloaded From projector-manual.com Sanyo Manuals

Sanyo PLC-XTC50L Specifications

General

Brand	Sanyo
Model	PLC-XTC50L
Category	Projector
Language	English