Sanyo PLC-XT25 User Manual

-55-
Optical Adjustment
2. Contrast adjustment (POL)
[ Before Adjustment ]
- Input a 100% of black raster signal.
G-Contrast adjustment (POL)
1. Loosen a screw J on the stopper plate which you intend to adjust.
2. Adjust the lever K (POL) to obtain the darkest brightness on the screen.
(This screw J is tightened later. this screw is tightend after Optical filter adjustment.)
WV
POL
POL
Screw-J
Screw-J
Lever-K
Lever-K
Polarized glass unit (Green)

Sanyo PLC-XT25 Specifications

General

Projection technology	LCD
Contrast ratio (typical)	1000:1
Projector native resolution	XGA (1024x768)
Resolution	1024 x 768 pixels
Dimensions (WxDxH)	302 x 422 x 162 mm
Display diagonal	1 \
Lamp type	UHP
Lamp power	300 W
Light source type	Lamp
Market positioning	Portable

Weight and Dimensions

Weight	9200 g