EasyManuals Logo

Sanyo PLC-XT25 User Manual

Sanyo PLC-XT25
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
-9-
Maintenance
Cleaning the Air Filter
Turn off the projector, and unplug the AC power cord
from the AC outlet.
First, clean up the dust on the projector and around the
air vents.
1
2
Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes
clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and ad-
versely affect the life of the projector. If a “Filter warning” icon (yellow or red) appears on the screen and the WARN-
ING FILTER indicator lights or blinks, clean the filter immediately. Clean the filter by following the steps below.
Pull out the filter cover from the projector and then re-
move the filter.
3
Reinstall the filter into the projector properly.
5
CAUTION
Do not operate the projector with the filter removed.
Dust may accumulate on the optical elements de-
grading picture quality.
Do not put anything into the air vents. Doing so may
result in malfunction of the projector.
Gently clean the filter by using a brush or blower.
WARNING: Do not wash the filter with water and any
other liquid matter. Otherwise the filter may be dam-
aged.
4
Reset the filter counter in the Setting Menu. See “Reset-
ting the Filter Counter” below.
6
Press and hold the
filter cover and pull
out the filter.
Filter cover
Filter
Filter
Filter cover
Be sure to reset the Filter counter after cleaning or replacing the filter.
Press the MENU button to display the On-Screen Menu.
Use the Point 7 8 buttons to move the red framed
pointer to the Setting Menu icon.
Use the Point ed buttons to move the red framed point-
er to Filter counter and then press the SELECT button.
A dialog box appears showing the total accumulated
time of the filter use, a timer setting option, and the re-
set option. Select Reset and the “Filter counter Reset?”
appears. Select [Yes] to continue.
1
2
Resetting the Filter Counter
Filter counter
NOTE: If the filter is heavily clogged and unable
to clean, replace it with a new one.
Consult your dealer for details.
Replacement Filter Part No.: 910-330-7184
Select Reset and the Filter
counter Reset?” appears.
Select [Yes],
then another
confirmation
box appears.
Select [Yes] again to reset
the Filter counter.
Another confirmation dialog box appears, select [Yes] to
reset the Filter counter.
3

Table of Contents

Other manuals for Sanyo PLC-XT25

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sanyo PLC-XT25 and is the answer not in the manual?

Sanyo PLC-XT25 Specifications

General IconGeneral
Projection technologyLCD
Contrast ratio (typical)1000:1
Projector native resolutionXGA (1024x768)
Resolution1024 x 768 pixels
Dimensions (WxDxH)302 x 422 x 162 mm
Display diagonal1 \
Lamp typeUHP
Lamp power300 W
Light source typeLamp
Market positioningPortable
Weight and Dimensions IconWeight and Dimensions
Weight9200 g

Related product manuals