To Next PageTo Next Page
Need help?Do you have a question about the Sanyo XL51 - PLC XGA LCD Projector and is the answer not in the manual?
General| Resolution | XGA (1024 x 768) |
|---|---|
| Contrast Ratio | 500:1 |
| Lamp Life | 2000 hours (Normal Mode), 3000 hours (Eco Mode) |
| Weight | 3.6 kg |
| Zoom Ratio | 1.2x |
| Aspect Ratio | 4:3 |
| Lamp Type | UHP |
| Display Technology | LCD |
| Screen Size | 40 - 300 inches |
| Input Terminals | S-Video |
| Projection Lens | f=21.5 - 25.8mm, F=1.7 - 1.9 |
Instructions on correct placement to avoid reduced lamp life and fire hazards.
Guidelines for projector placement relative to the screen for optimal image projection.
Details required cables and connection steps for computer input.
Instructions for connecting video sources using RCA and S-Video cables.
Instructions for connecting component and RGB Scart video sources.
Step-by-step guide for powering on the projector and initial setup.
Procedure for entering the PIN code when the projector is locked.
Instructions for safely powering down the projector, including lamp cooling.
Guide on navigating and using the projector's on-screen menu system.
Explains the main menu items for computer and video sources.
Procedure for correcting keystone distortion using the KEYSTONE button.
Describes frequently used remote control functions like AUTO SET and FREEZE.
How to select computer input sources (Computer 1/2) using direct controls or menus.
How the projector automatically tunes to computer signals and manual selection options.
Function to automatically adjust fine sync, dots, horizontal, and vertical positions.
Detailed steps for manually adjusting PC signal parameters and storing settings.
Selecting video input sources like Auto, Video, S-Video, and Component.
Fine-tuning video image parameters: contrast, brightness, color, tint, color temp., white balance.
Accessing Key lock, PIN code lock, and Alarm settings for projector security.
Setting up PIN code lock for projector operation and entering/changing the PIN.
How to activate, set, and release the antitheft alarm feature.
Procedures for arming and disarming the antitheft alarm.
Explains projector status based on WARNING and POWER indicator lights/blinks.
Instructions for cleaning or replacing the air filter and resetting the filter counter.
Step-by-step guide for replacing the projection lamp and ordering a new one.
How to reset the lamp replacement counter after replacing the lamp.
Common problems and their solutions, including no power, no image, and indicator issues.
Table detailing projector status based on indicator lights and conditions.
List of supported computer resolutions, H-Freq, and V-Freq for optimal compatibility.
Detailed technical data including dimensions, weight, interfaces, power, and operating environment.
