What to do if the temperature inside Sanyo PLC-XL50 is abnormally high?
If the temperature inside your Sanyo Projector is abnormally high, wait for the projector to cool down. When the temperature returns to normal, the POWER indicator will emit a red light, and you can turn on the projector. Also, remember to check and clean the air filter.
General| Resolution | 1024 x 768 (XGA) |
|---|---|
| Contrast Ratio | 500:1 |
| Display Type | LCD |
| Projection Size | 30 to 300 inches |
| Zoom | 1.2x |
| Lamp Life | 2000 hours |
| Lamp Type | UHP |
| Input Ports | VGA, Composite |
Provides crucial safety warnings regarding fire, electric shock, and proper installation.
Describes the functions of each button on the remote control for operating the projector.
Step-by-step guide for powering on the projector and entering the PIN code.
How to choose between different computer input signals (Computer 1, Computer 2).
Guides on automatic and manual selection of computer system settings.
Explains the automatic adjustment of PC image parameters like sync and position.
Details manual adjustments for fine sync, dots, horizontal, vertical position, and clamp.
Covers adjusting display area H/V and storing/clearing PC adjustment settings.
Detailed adjustments for Contrast, Brightness, Color, Tint, White Balance, Sharpness, Gamma.
How to select video input sources like Video, S-Video, and Component.
Guides on selecting video system (PAL/NTSC) and component signal formats.
Detailed adjustments for video image properties like Color, Tint, and White Balance.
Sets and manages a PIN code to prevent unauthorized changes to the screen logo.
Details how to set or change the projector's PIN code for security.
Guides for changing PIN code lock settings and the PIN code itself.
Explains how to set, use, and release the antitheft alarm function.
Details how to change PIN code, reset settings, and configure alarm volume and sensitivity.
Important safety precautions for handling Sanyo Ni-MH battery packs.
Interprets projector status based on WARNING and POWER indicator lights.
Guides on how to clean the air filter and reset the filter counter.
Step-by-step guide for replacing the projector's lamp, including safety warnings.
Critical safety information regarding lamp handling and potential risks.
Provides solutions for common problems like no power, no image, or remote control issues.
To Next Page
