What to do if Sanyo PLC-XL50A Projector cannot be turned on because of high temperature?
If your Sanyo Projector won't turn on due to high temperature, it means the internal temperature is too high. Allow the projector to cool down. Once the temperature returns to normal, the POWER indicator will show a red light, and you can turn on the projector. Also, remember to check and clean the air filter.
General| Brightness | 2000 lumens |
|---|---|
| Resolution | 1024 x 768 (XGA) |
| Lamp Life | 2000 hours (Normal Mode), 3000 hours (Eco Mode) |
| Display Type | LCD |
| Lamp | 200W UHP |
| Throw Ratio | 1.7 - 2.0:1 |
| Speakers | 1W Mono |
| Lamp Type | UHP |
| Projection Technology | 3LCD |
| Zoom Ratio | 1.2x |
| Keystone Correction | ±15° vertical |
| Video Compatibility | NTSC, PAL, SECAM |
| Input Terminals | S-Video |
| Output Terminals | Audio out |
| Inputs | VGA, S-Video, Composite Video |
Guidelines for safe practices when moving and transporting the projector.
Guidelines for projector placement and tilt/height adjustment.
Step-by-step procedures for turning the projector on and off.
Guide to accessing and using the projector's menu system.
Auto PC adjustment and manual tuning of image parameters.
How to select video inputs and broadcast system formats.
Selecting video image presets and fine-tuning quality.
Customizing screen logo, PIN locks, and key locks for security.
Understanding warning lights and basic cleaning procedures.
Step-by-step guide for replacing the projection lamp and safety precautions.
To Next Page
