Sanyo PLC-XL50A - Menu Bar

Basic Operation
Menu Bar
e PC System Menu
Used to select the computer system (p.28).
y
Image Adjust Menu
Used to adjust the computer image from Contrast,
Brightness, Color temp., White balance (R/G/B),
Sharpness, and Gamma (pp.34-35).
o
Setting Menu
Used to set the projector’s operating
configurations (pp.45–54).
i
Sound Menu
Used to adjust the volume or mute the sound
(p.25).
t
Image Select Menu
Used to select an image level from Dynamic, Standard,
Real, Blackboard (Green), Colorboard and Image 1–4
(pp.32-33).
For computer source
e AV System Menu
Used to select the system of selected video source (p.39).
t
Image Adjust Menu
Used to adjust the picture image from Contrast,
Brightness, Color, Tint, Color temp., White balance
(R/G/B), Sharpness, Gamma, Noise reduction, and
Progressive (pp.42-43).
For video source
Used to select input source, Video or Computer (pp.37-
38).
r
PC Adjust Menu
Used to adjust parameters to match with input signal
format (pp.29-31).
r
Image Select Menu
Used to select an image level from Dynamic, Standard,
Cinema, Blackboard (Green), Colorboard and Image 1–4
(pp.40-41).
y
Screen Menu
Used to set the size of image to Normal or Wide
(p.44).
q
Guide Window
Shows the selected Menu of the On-Screen Menu.
w Input Menu
Used to select the input source, Computer or Video (p.27).
u
Screen Menu
Used to adjust the size of image from Normal, True,
Wide, Full and Digital zoom +/– (pp.35-36).
For detailed functions, see Menu Tree on pages 63-64.
q
Guide Window
Shows the selected Menu of the On-Screen Menu.
w Input Menu
i Setting Menu
Used to set the projector’s operating
configurations (pp.45-54).
u
Sound Menu
Used to adjust the volume or mute the sound
(p.25).
t
e irq w y u o
q w e r t y u i
23