What to do if the LAMP REPLACE indicator lights yellow on my Sanyo Projector?
When the life of the projection lamp draws to an end and the LAMP REPLACE indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replacement counter after replacing the lamp.
What to do if my Sanyo PLC-XE33 Projector is off?
If your Sanyo Projector is off, the AC power cord may be unplugged. Check the AC power cord and plug it back in.
What to do if my Sanyo PLC-XE33 Projector detects an abnormal condition and cannot be turned on?
If your Sanyo Projector detects an abnormal condition and cannot be turned on, unplug the AC power cord and plug it in again to turn on the projector. If the projector turns off again, unplug the AC power cord and contact the dealer or the service center for service and checkup.
What to do if my Sanyo Projector is in stand-by mode?
If your Sanyo Projector is in stand-by mode, press the ON/STAND-BY button to turn on the projector.
What to do if the temperature inside my Sanyo PLC-XE33 is abnormally high?
If the temperature inside your Sanyo Projector is abnormally high, wait for the projector to cool down enough and for the POWER indicator to stop blinking.
What to do if my Sanyo Projector is preparing for stand-by or the projection lamp is being cooled down?
If your Sanyo Projector is preparing for stand-by or the projection lamp is being cooled down, wait until the cooling is completed and the POWER indicator stops blinking.
Overview of projector's advanced technology, multimedia features, and LCD technology.
Essential reading for owners, including safety precautions and warnings.
Detailed guidelines on safe operation, installation, and handling of the projector.
Safety rules for proper installation, positioning, and transport of the projector.
Guidelines for optimal projector placement and adjustment of the adjustable foot.
How to connect computers to the projector using VGA and audio cables.
How to connect video equipment using S-Video and composite video cables.
Guide to connecting the AC power cord and power requirements for different regions.
Procedures for cleaning projector filters and resetting the filter counter.
Step-by-step guide for safely replacing the projector's lamp.
Important safety warnings and precautions for handling high-pressure projector lamps.
Solutions for common problems like no power, no image, or distorted images.
General| Resolution | 1024 x 768 (XGA) |
|---|---|
| Lamp Life | 2000 hours (Normal Mode), 3000 hours (Eco Mode) |
| Display Technology | LCD |
| Display Type | 3LCD |
| Aspect Ratio | 4:3 |
| Lamp Type | UHP |
| Projection Size | 30 to 300 inches |
| Throw Distance | 1.2 m to 10 m |
| Input Ports | S-Video, Composite |
| Output Ports | VGA |
| Power Consumption | 250 W |
| Noise Level | 35 dB |
| Brightness | 3300 ANSI lumens |
To Next Page
