EasyManua.ls Logo

Sanyo PLC-XE33

Sanyo PLC-XE33
77 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
Computer Input
Store
Thisprojectorhasthepicturescreenresizefunction,which
enablesyoutocustomizetheimagesize.
Screen Menu
Screen Size Adjustment
Providetheimagetofitthescreensize.
Normal
True
Providetheimageinitsoriginalsize.Whentheoriginal
imagesizeislargerorsmallerthanthescreensize
(1024x768),theprojectorenterstothepanningmode
automatically.UsethePoint▲▼◄►buttonstopanthe
image.Whenadjusted,thearrowswillturnred.When
reachedtothecorrectionlimits,thearrowswilldisappear.
Full
Providethefullscreenimage.
Note:
•TheScreenMenu,onlyNormalandCustomcanbeoperated,Widewillbedisabledanddisplayedingray
when720p(HDTV),1035i (HDTV),or1080i (HDTV)isselectedinthePCSystemMenu(p.28).
•Thisprojectorcannotdisplayanyresolutionhigherthan1600x1200.Ifyourcomputer’sscreenresolutionis
higherthanit,resettheresolutiontothelowerbeforeconnectingtotheprojector.
•Theimagedatainotherthan1024x768ismodifiedtofitthescreensizeininitialmode.
•True,Full,andDigital zoom +/–aredisabledandcannotbedisplayedwhen480i,575i,480por575pis
selectedinthePCSystemMenu(p.28).
1
2
Tostoretheadjusteddata,selectStoreandpressthePoint
►ortheSELECTbutton.UsethePoint▲▼buttonsto
selectonefromImage 1to4andpresstheSELECTbutton.
AconfirmationboxappearsandthenselectYes.Stored
datacanbecalledupbyselectinganImage (1–4)inthe
ImageModeSelectiononpage32.
Wide
Providetheimagetofitthewidevideoaspectratio(16:9)by
expandingtheimagewidthuniformly.Thisfunctioncanbe
usedforprovidingasqueezedvideosignalat16:9.
PresstheMENUbuttontodisplaytheOn-Screen
Menu.UsethePoint▲▼buttonstoselectScreenand
thenpressthePoint►ortheSELECTbutton.
UsethePoint▲▼buttonsselectthedesireditemand
thenpresstheSELECTbutton.
Aconfirmationboxappearsand
thenselectYes.
Downloaded From projector-manual.com Sanyo Manuals

Table of Contents

Other manuals for Sanyo PLC-XE33

Related product manuals