Sanyo PLC-XE33

10
Part Names and Functions
Top Control
⑦ LAMP REPLACE indicator
 Lightsyellowwhentheprojectionlampreachesits
endoflife(pp.61,69).
⑧ WARNING indicator
 –Lightsredwhentheprojectordetectsan
abnormalcondition.
 –Blinksredwhentheinternaltemperatureofthe
projectorexceedstheoperatingrange(pp.58,
69).
④ ON/STAND–BY button
Turntheprojectoronoroff(pp.18-20).
⑤ POWER indicator
 –Lightsredwhentheprojectorisinstand-bymode.
 –Lightsgreenduringoperations.
 –BlinksgreeninthePowermanagementmode
(p.50).
⑥ MENU button
 OpenorclosetheOn-ScreenMenu(p.21).
② POINT
▲▼◄►
(VOLUME +/–) buttons
 –Selectanitemoradjustthevalueinthe
On-ScreenMenu(p.21).
 –PantheimageintheDigitalzoom+/-mode
(p.35).
 –Adjustthevolumelevel(Point◄►buttons)
(p.24).
③ AUTO SETUP button

ExecutethesettingofAutosetup(includesInput
search,AutoPCadj.andAutoKeystonefunctions)
inthesettingmenu.(pp.23,44).
① SELECT button
 –Executetheselecteditem(p.21).
 –ExpandorcompresstheimageintheDigital
zoommode(p.35).
①
②
③
④
⑤
⑥
⑦
⑧
Downloaded From projector-manual.com Sanyo Manuals