Sanyo PLC-XE33

22
Menu Bar
Fordetailedfunctionsofeachmenu,see“MenuTree”onpages67-68.
Basic Operation
①
②
③
④
⑤
⑥
⑦
⑧
MainMenu Sub-Menu
⑨
⑩
③ Image select
 Forcomputersource,usedtoselectanimagemodefromamongDynamic,Standard,Real,Blackboard(Green),
Colorboardandimage1 - 4(p.32).
ForVideosource,usedtoselectanimagemodeamongDynamic,Standard,Cinema,Blackboard(Green),Colorboard
andImage 1- 4(p.39).
④
Image adjust
 Forcomputersource,usedtoadjustcomputerimage[Contrast,Brightness,Color temp.,White balance (R/G/B),
SharpnessandGamma](pp.33-34).
ForVideosource,usedtoadjustpictureimage[Contrast,Brightness,Color,Tint,Color temp.,White balance (R/G/
B)
,Sharpness,Gamma,Noise reductionandProgressive](pp.40-41).
② PC adjust
 SelectAuto PC adj.,Fine sync,Total dots,Horizontal,Vertical,Clamp,Display area-HandDisplay area-Vtoadjust
theparameterstomatchwiththePCinputsignalformat(pp.29-31).
⑤
Screen

Forcomputersource,usedtoadjustsizeoftheimage[Normal,True,Wide,Full,CustomandDigital zoom +/–](pp.34-
35).
ForVideosource,usedtosetsizeofimage[Normal,WideandCustom](p.42).
① Input
 UsedtoselectaninputsourcefromComputer 1,Computer 2orVideo(pp.27,36-37).
⑥ Sound
 Usedtoadjustthevolumeormutethesound(p.24).
⑧ Information
 Displaytheinputsourceinformation:Input,H-sync freq.,V-sync freq.,Screen,Language,Lamp status,Lamp
counter
,Power management,Key lock,PIN code lockandRemote control(p.57).
⑩ Guide
 Thekeyoperationisdisplayed.
⑦
Setting
Usedtosettheprojector’soperatingconfigurations(pp.43-56).
⑨ Network
 Seetheowner’smanualof“NetworkSet-upandOperation”.
Downloaded From projector-manual.com Sanyo Manuals