Sanyo PLC-XE33

39
Video Input
Image select Menu
SelectthedesiredimagemodeamongDynamic,Standard,
Cinema,Blackboard (Green),Colorboard,Image 1,
Image 2,Image 3andImage 4bypressingtheIMAGE
buttonontheremotecontrol.
Standard
Picturemodeadjustedwithfinetone.
Cinema
Blackboard (Green)
Image 1–4
IMAGE button
Dynamic
Cinema
Image Mode Selection
Fortheimageprojectedonablackboard.
Thismodehelpenhancetheimageprojectedona
blackboard.Thisismainlyeffectiveonagreencolored
board,nottrulyeffectiveonablackcoloredboard.
Blackboard (Green)
Dynamic
Standard
Remote Control
IMAGE button
Direct Operation
Forviewingpicturesinabrightroom.
Normalpicturemodepresetontheprojector.
ForviewingwiththeuserpresetimagemodeintheImage
AdjustMenu(seepages40-41).ThisImagememoryis
providedineachcomputer,scart,component,S-videoand
videoinputsource.
1
2
Menu Operation
Image 1
Image 2
Image 3
Image 4
Colorboard
Colorboard
Atthetimeofsimpleprojectiononthecoloredwall,you
cangettheclosecolorimagetothecolorimageprojected
onawhitescreenbyselectingthesimilarcolortothewall
colorfromthepresetfourcolors.
PresstheMENUbuttontodisplaytheOn-ScreenMenu.
UsethePoint▲▼buttonstoselectImageselectand
thenpressthePoint►ortheSELECTbutton.
UsethePoint▲▼buttonstoselectthedesireditem
andthenpresstheSELECTbutton.
Downloaded From projector-manual.com Sanyo Manuals