Sanyo PLC-XL51 - Page 24

- 24 -
4
Main Board ass'y removal.
1. Remove the 2 screws-A(M2.5x6) and remove the Antenna board, Shield antenna.
2. Remove the 4 screws-B(M2.5x6), screw-C(M4x6), 2 screws-D(T3x10) and remove the Main board ass'y.
C
Main board ass'y
A
D
B
Mechanical disassemblies
Hook
Press this part
A
D
B
B
B
Antenna board
Shield antenna