Sanyo RCS-TM80BG - Deleting the Program Timer

EG-9
EG
• Deleting the Program Timer
To delete the program timer setting, follow the steps below.
1. Press
to enter the program confirmation mode.
2. Press
and / tto select the day of
the program you want to delete.
3. Press
/ to select a TIMER No. (from 1 to 6).
4. Press
to display the program setting mode .
5. Press
to delete the program.
Note
• After deleting, the unit returns to the program confirmation
mode
.
• If you press
during the setting, the unit returns to the
program comfirmation mode.
• If there is no operation made for 3 minutes during the setting, the unit returns to the normal mode.
43512