Sanyo RCS-TM80BG - Sleeping Function; Setting the Sleeping Function; To cancel the sleeping function operation

EG-14
6. Sleeping Function
* This function leads you to a comfortable sleep
and changes the room temperature during your
sleep.
* You can set the off timer every one hour from 1
to 10 hours.
Operating time
Display of remote control unit
(during the time setting)
Sleeping function
indication
Off time
In case the present time
is 1:30 a.m.
Display of remote control unit
(during sleeping function setting)
Sleeping function indication
* If no operation is made for 3 minutes, the time
setting mode will be automatically finished.
Ex. In case of 7 hours timer
1. SLF button
Press .
• Each time the button is pressed, the indication
changes in the following order.
7H 6H
....
1H 10H
....
1H
(every one hour)
(Press to stop the time setting.)
2. Press .
• The timer operation starts.
When the off time comes:
• The indoor unit stops.
* The temperature returns to the setting at
the time when sleeping function operation
started.
To cancel the sleeping function operation:
• Press
.
* The temperature setting remains at the
time cancelled.
• The following buttons also cancel the
sleeping function operation.
button
Stop the indoor unit after the sleeping
function operation is cancelled.
button
Changes the operation mode after the
sleeping function operation is cancelled.