5-7. Cold Draft Prevention (Heating)
●
This function controls indoor fan speed so a strong draft of cold air will not blow out before the indoor heat
exchange coil have sufficiently warmed up.
●
STANDBY lamp on front of the indoor unit lights up when this function is working.
●
Indoor fan operates in LL until indoor heat exchange coil temperature reaches 32°C.
●
In case of after releasing the defrosting, indoor fan halt its operation until the coil temperature reach 32°C.
●
When the coil temperature rises above Tc°C, indoor fan operates in set speed.
The operation temperature shown as Tc in the chart differs by models.
To Next Page
Loading...
