6. REFRIGERANT FLOW DIAGRAM
19
Indoor Unit SAP–K91GJA (
✕
2) SAP–K91GJA (
✕
2) SAP–K91GJA (
✕
2)
Outdoor Unit SAP–CM1621GA SAP–CM1821GA SAP–CM1821JA
Insulation of Refrigerant Tubing
Because capillary tubing is used in the outdoor unit, both the
wide and narrow tubes of this air conditioner become cold. To
prevent heat loss and wet floors due to dripping of condensa-
tion, both tubes must be well insulated with a proper insula-
tion material. The thickness of the insulation should be a min.
8 mm.
After a tube has been insulated,
never try to bend it into a narrow
curve because it can cause the tube
to break or crack.
To Next Page
Loading...
