Fan motor
(3) Loosen the 5 screws of front panel. (Fig.55)
Lift the front panel and remove it while pushing the right side panel inwards.
(4) Remove the 5 screws from the edge of right side board and lift to remove the right side board. (Fig.56)
9-2-3. Removing the fan motor
(1) Remove the screw of the fan and then remove the propeller fan. (Fig.57)
The screw has reverse winding.
(2) Remove the 4 tapping screws fixing the motor. (Fig.58)
Pull out the lead out wire and remove the motor.
Remove the 2 tapping screws fixing the motor support and lift to remove the motor support.
NOTE
Fig. 55 Fig. 56
Fig. 57 Fig. 58
Front panel
Propeller fan
Fan motor fixing frame
To Next Page
Loading...
