BEFORE YOUR FIRST USE
Carefully unpack the breadmaker and remove all packaging materials. To remove any
dust that may have accumulated during packaging, wipe the inner pot, kneader blade
and the outside of the breadmaker with a clean, damp cloth. Do not use harsh or
abrasive cleaners on any part of the breadmaker.
Warning : Do not immerse the cord, plug, inner pot or base in water or other Iicwid.
Do not use metal scouring pads on any part or parts of the breadmaker because pieces
of the pad may break off and touch electrical parts, creating a risk of electric shock.
Place the bread machine on
areas where cooking grease
Plug the breadmaker into a
a dry, stable surface away from burners and away from
or water may splatter onto it.
230 volt/240 volt 50 Hz AC only outlet.
IMPORTANT SAFETY TIPS FROM SANYO
. Keep the breadmaker out of the reach of infants and children, especially while it is
hot. If any pads are accidentally touched, the operation may stop.
● Be careful to keep your face and hands away from the breadmaker.
● Place the breadmaker at least 2 inches (50mm) away from any walls.
. Do not cover the breadmaker with towels or any other material because steam would
not be able to escape. This could cause the lid to warp or change color.
● Do not remove the inner pot or insert your hand into the inner pot during operation.
If you need to remove the inner pot before operation is complete, first press the
STOP pad to stop ooeration of the breadmaker.
. Remove any flour, bread crumbs or other materials from the inside of the inner case
using a damp sponge or cloth or a small, portable vacuum cleaner.
● Do not put a larger quantity of ingredients into the inner pot than recommended.
If you do so, the bread may not mix or bake correctly and the breadmaker may
be damaged. The maximum amount of flour to be used for the BAKE settings is
4 ?4 cups. The maximum amount of prepackaged breadmaker bread mixes is 4 CUPS.
The maximum amount for the DOUGH setting is 4 !4 cups flour.
. Handle the inner pot with care. Remove the inner pot by pulling straight up on the
handle. Do not turn or shake the inner pot while taking it out. If the inner pot is
damaged or bent, the temperature sensor won’t work properly. Handle hot inner pot
using pot holders or oven mitts.
–3–
To Next Page
Loading...
