EasyManua.ls Logo

Sanyo VCC-MC800P - Specifications

Sanyo VCC-MC800P
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
57
Specifications
Image sensor :1/4"
Effective pixels : 752 (H) x 582 (V)
Horizontal resolution : Over 520 TV lines
Lens : x36 zoom lens, f=3.4 - 122.4 mm (F1.6 - 4.5)
Electronic zoom and gearing
Zoom speed setting possible
Electronic zoom : 16 power (combined with optic zoom gives 576 power max)
Max zoom magnification setting possible
Vertical resolution ON/OFF setting
Auto focus : AUT/ONE-PUSH/MANUAL
AF area setting possible (3 step)
Iris control : AUTO/MANUAL
Synchronization method : Internal synchronization/Line lock
V phase adjustment possible
Lowest image illumination : 1.0 lx (F1.6, AGC gain at maximum, COLOR mode)
0.05 lx (F1.6, AGC gain at maximum, B/W mode)
0.032 lx (F1.6, AGC gain at maximum, x32 SENSE UP, COLOR mode)
0.002 lx (F1.6, AGC gain at maximum, x32 SENSE UP, B/W mode)
S/N : Over 50 dB
Backlight compensation : Center-weighted average metering/multi-spot evaluative metering
Day/Night (For VCC-800P only) : AUTO / COLOR / B/W settings available
Electronic shutter : Fast shutter speed (SHORT) mode: 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000
Slow shutter speed (LONG) mode: x1, x2, x4, x8, x16, x32
Electronic sensitivity boosting : AUTO/OFF, works with auto iris
Up to x32 max setting possible
White balance : ATW/AWC/MWB/3200/5600/FLUO (Fluorescent lighting)
AGC gain : Low/Normal/Middle/High/Off (When “OFF” is selected, manual gain adjustment is
available.)
Motion sensor : ON/OFF, individual settings possible
Aperture : H/V setting possible
Privacy masking : ON/OFF, max of 24 masked locations (Wide view screen; 1 screen max 4 masks)
The mask can be set regardless of the camera’s direction.
Alarm input/output : External input: 8, External output: 2, NO (Normal open)/NC (Normal closed) switch
Motion sensor with external alarm AND/OR output options
Camera titles : ON/OFF, 16 characters
Camera view : 8 settings
Auto mode : Sequential pan/auto pan/tour (4 patterns each), Auto return
Rotation range : Horizontal: 360° endless. Vertical: -5° - 185°
Rotation speed : Horizontal- Preset: 435°/second. Manual: 0.1° - 120°/second
Vertical- Preset: 400°/second. Manual: 0.1° - 120°/second
Preset positions : 256 positions
Communications : Coaxial control, RS-485
Operational temperature/humidity : -10 – 50°C/below 90% RH
Power source : DC 24 V
External appearance and specifications subject to change without notice.
L5BW2_XE(VCC-MC800P_MC700P)(GB).book 57 ページ 2007年1月18日 木曜日 午前10時18分

Table of Contents

Other manuals for Sanyo VCC-MC800P

Related product manuals