Sanyo VCC-XZN600P - Features

13
Features
Zooming Function
b You can store the zoom and focus
settings of surveillance locations by
camera setting number.
& [CAMERA] ⇒ [POSITION]
b The electronic zooming function can be
used to zoom in the object at the
magnification power higher than that in
the optical zoom.
& [LENS] ⇒ [ZOOM] ⇒ [EL ZOOM]
b You can change the zooming speed.
& [LENS] ⇒ [ZOOM] ⇒ [SPEED]
y
POSITION
POSIT ION
POSITION
SET
x 3.0
x 3.0
x 3.0
y
POSITION
POSIT ION
POSITION
SET
x 1.0
CAMERA 1 CAMERA 2
Alarm Settings
b The camera has a built-in motion sensor.
& [CAMERA] ⇒ [MOTION] ⇒ [ON]
b The alarm condition can be detected by
connecting door switches or infrared
sensors.
& [ALARM] ⇒ [ALARM IN]
Not detected Detected
Remote Operations
b
The camera can be controlled remotely
by establishing the network
communication.
& [OPTION] ⇒ [NETWORK]
b
The camera can be controlled remotely
by establishing the RS-485 or coaxial
super imposed communication.
& [OPTION] ⇒ [SYSTEM]
b You can switch the viewing mode
manually between the color mode and
the black/white mode.
& [CAMERA] ⇒ [COLOR] ⇒
[EXT ALARM]
VCC-XZN600P
VCC-XZ600P
Shutter Speed Settings
The camera can
monitor a
fast-moving object.
& [CAMERA] ⇒
[SHUTTER]
Alarm Notice
b The camera title you specified in the
[OPTION] menu blinks to notify that the
alarm condition is detected.
& [ALARM] ⇒ [ALARM DISPLAY]
b When the alarm condition is detected,
the object on the screen is zoomed in.
& [ALARM] ⇒ [ALARM IN] ⇒
[ACTION] ⇒ [ZOOM]
b A buzzer or lamp can be used to notify
you of detection of alarm when you are in
a distant place from the monitor.
& [ALARM] ⇒ [ALARM OUT]
DOOR1
DOOR1
DOOR1
& You can perform the settings on the camera by
navigating through the menu screens.
L5CE2_CD2_XE(INSTALLATION).book 13 ページ ２００８年４月１６日 水曜日 午後３時１８分