14
Day/Night Function
According to the luminance level, the
viewing mode will be switched
automatically between the color mode
and the black/white mode.
You can adjust the luminance threshold
for switching the viewing mode.
& [CAMERA] ⇒ [DAY/NIGHT] ⇒
[AUTO] ⇒ [LEVEL]
B/W
Color
B/W Color
Switchover point
LOW MID HIGH
White Balance Adjustment
In addition to the white balance
adjustment, you can use the mask
patterns to cover extremely bright or
dark light source in the monitored image
so that the white balance adjustment is
properly configured.
& [CAMERA] ⇒ [WHITE BALANCE] ⇒
[ATW] ⇒ [MASKING]
Backlight Compensation
b The camera uses 48-part split
metering areas to compensate the
backlight condition by metering each
area.
You can also select 5-part split
metering areas (center, left, right, top
and bottom) for metering.
& [CAMERA] ⇒ [BLC] ⇒ [MULT] or
[CENT]
b You can mask a metering area you do
not want to meter.
& [CAMERA] ⇒ [BLC] ⇒ [MASK]
Privacy Masks
The privacy masks can be used to
protect privacy by hiding certain part of
the monitored image.
(Maximum 4 masks)
& [PRIVACY MASK]
Camera Title
You can set and display the camera title.
This helps you confirm from which camera
the image is sent when multiple cameras
are connected. (Maximum 16 characters)
& [OPTION] ⇒ [DISPLAY] ⇒ [TITLE]
ROOM1
ROOM2
ROOM1 ROOM2
L5CE2_CD2_XE(INSTALLATION).book 14 ページ ２００８年４月１６日 水曜日 午後３時１８分
To Next Page
Loading...
