– 19 –
Adjustment value determination is effectuated using the
“CHECK", "MS" values. If
CHECK = wc0, wc1, wc2
MS = ms1, ms2
the adjustment values fulfill the conditions below, they are
determined as within specifications.
Adjustment value determination
wc0=128 ± 2, wc1=128 ± 2, wc2=150 ± 50
2000<=ms1<=4000, 2500<=ms2<=4500
Adjustment values other than the above are irrelevant.
4. CMOS White Point Defect Detect Adjustment
Preparation:
POWER switch: ON
Adjustment method:
1. Double-click on the DscCalDi.exe.
2. Select “CCD Defect” on the LCD “Test”, and click the “Ye s”.
3. After the adjustment is completed, OK will display.
4. Click the OK.
Adjustment value determination
AF_TEMP_AD: ATAD
ATAD: adjustment value of focus temperature A/D
(250<=ATAD<=893)
AF_WIDE: ZW
ZW: adjustment value of focus at zoom position wide
(–60<=ZW<=35)
AF_MID1: ZM1
ZM1: adjustment value of focus at zoom position middle1
(–90<=ZM1<=20)
AF_MID2: ZM2
ZM2: adjustment value of focus at zoom position middle2
(-78<=ZM2<=32)
AF_TELE: ZT
ZT: adjustment value of focus at zoom position tele
(–51<=ZT<=59)
3. AWB Adjustment
Preparation:
POWER switch: ON
Setting of pattern box:
Color temperature: 3100 ± 20 (K)
Luminance: 900 ± 20 (cd/m
2
)
Adjusting method:
1. Set a distance of 0.5-1.0 cm between the pattern box and
the camera. (Do not enter any light.)
2. Double-click on the DscCalDi.exe.
3. Click the AWB, and click the Yes.
4. AWB adjustment value will appear on the screen.
5. Click the OK.
Camera
Pattern box
(color viewer)
Dsc Calibration x
OK
AWB Results:
1:
WB=243,497,413
CHECK=128,128,122
MS=3848,4198
Fno_FOR_ISO=-1
SS_FOR_ISO=-1
YLEVEL_FOR_ISO=-1
Copy
To Next Page
Loading...
Need help?
General