To Next PageTo Next PageWhy is there noise in my Sanyo Camcorder image?
If there is noise in the captured image with your Sanyo Camcorder, the ISO sensitivity setting might be too high. Try setting the ISO sensitivity to a lower level.
Why does the flash not operate on my Sanyo VPC-CG88EX?
If the flash on your Sanyo Camcorder isn't working, it could be because the flash off mode is selected. Try setting the flash to automatic or forced flash mode. Also, check if the battery pack is dead; if so, recharge or replace it, or use the AC adapter.
What to do if Sanyo Camcorder image is too dark?
If the images from your Sanyo Camcorder are too dark, it might be because the flash was blocked, the subject was too far away, the subject was lit from behind, or there wasn't enough light. Ensure nothing is blocking the flash, move closer to the subject (within flash range), try using forced flash mode, or adjust the ISO sensitivity setting.
Why is my Sanyo VPC-CG88EX image too bright?
If your Sanyo Camcorder images are too bright, it could be due to the forced flash mode being selected or the subject being too bright. Try selecting a different flash mode or using the exposure compensation function.
How to fix Sanyo VPC-CG88EX Camcorder image when it is not in focus?
If your Sanyo Camcorder's images are not in focus, it could be because the subject is too close, the camera moved when the button was pressed (camera shake), or the lens is dirty. Ensure the subject is within the photographable range and select the correct focus setting, hold the camera steady while pressing the button halfway to lock focus before fully pressing it, and clean the lens.
Why does my Sanyo VPC-CG88EX beep when using the self-timer?
If your Sanyo Camcorder is beeping and you can't use the self-timer, the battery pack might be low. Recharge or replace it with a fully charged battery, or connect the AC adapter.
Why can't I shoot with my Sanyo VPC-CG88EX?
If an icon appears on your Sanyo Camcorder and shooting is not possible, the camera’s internal temperature might be high. Discontinue shooting and wait for the camera to cool down before using it again.
What to do if my Sanyo Camcorder won't take a picture?
If your Sanyo Camcorder doesn't capture an image when you press the button, ensure the power is on. If the power save function is active, turn the camera on before shooting. If the camera was turned off, press the ON/OFF button to turn it on.
Why does the zoom stop on my Sanyo Camcorder?
If the zoom movement on your Sanyo Camcorder stops momentarily when zooming in or out, it's likely because the optical zoom has reached its maximum magnification. Release the zoom switch and push it again.
Why does the digital zoom not work on my Sanyo VPC-CG88EX?
If the digital zoom isn't working on your Sanyo Camcorder, check if the still image is set to 4 or 5; if so, change it to a different mode. Also, verify that the digital zoom setting is turned 'ON'.
General
