To Next PageTo Next PageWhat to do if my Sanyo Camcorder won't take a picture?
If your Sanyo Camcorder doesn't capture an image when you press the button, ensure the power is on. If the power save function is active, turn the camera on before shooting. If the camera was turned off, press the ON/OFF button to turn it on.
Why is there noise in my Sanyo Camcorder image?
If there is noise in the captured image with your Sanyo Camcorder, the ISO sensitivity setting might be too high. Try setting the ISO sensitivity to a lower level.
How to fix Sanyo VPC-CG88EX when it has no power?
If your Sanyo Camcorder has no power, the battery pack may be dead. Try recharging the battery pack, or replacing it with a fully charged one. Alternatively, connect the AC adapter (if you have one).
What to do if Sanyo Camcorder says maximum images reached?
If your Sanyo Camcorder has reached the maximum number of images or video recording time, install a new card or delete unnecessary images.
Why does the digital zoom not work on my Sanyo VPC-CG88EX?
If the digital zoom isn't working on your Sanyo Camcorder, check if the still image is set to 4 or 5; if so, change it to a different mode. Also, verify that the digital zoom setting is turned 'ON'.
Why does no playback image appear on my Sanyo Camcorder?
If no playback image appears on your Sanyo Camcorder, ensure the camera is set to the playback mode.
Why does my Sanyo Camcorder turn off by itself?
If your Sanyo Camcorder turns off by itself, it's likely due to the power save function. Simply turn the camera on again.
Why are the colors wrong on my Sanyo Camcorder indoors?
If the colors of your indoor images from Sanyo Camcorder aren't correct, it might be due to the ambient lighting or an incorrect white balance setting. Try using the forced flash mode or adjusting the white balance setting.
Why does my Sanyo VPC-CG88EX beep when using the self-timer?
If your Sanyo Camcorder is beeping and you can't use the self-timer, the battery pack might be low. Recharge or replace it with a fully charged battery, or connect the AC adapter.
How to fix Sanyo VPC-CG88EX Camcorder image when it is not in focus?
If your Sanyo Camcorder's images are not in focus, it could be because the subject is too close, the camera moved when the button was pressed (camera shake), or the lens is dirty. Ensure the subject is within the photographable range and select the correct focus setting, hold the camera steady while pressing the button halfway to lock focus before fully pressing it, and clean the lens.
General
