– 20 –
Adjustment value determination is effectuated using below val-
ues.
The adjustment values fulfill the conditions below, they are de-
termined as within specifications.
Adjustment value determination
AF_TEMP_AD: ATAD
ZW: adjustment value of focus temperature A/D
(0<=ATAD<=1023)
AF_WIDE: ZW
ZW: adjustment value of focus at zoom position wide
(–126<=ZW<=110)
AF_MID1: ZM1
ZM1: adjustment value of focus at zoom position middle1
(–138<=ZM1<=121)
AF_MID2: ZM2
ZM2: adjustment value of focus at zoom position middle2
(–132<=ZM2<=114)
AF_MID3: ZM3
ZM3: adjustment value of focus at zoom position middle3
(–123<=ZM3<=104)
AF_MID4: ZM4
ZM4: adjustment value of focus at zoom position middle4
(–147<=ZM4<=115)
AF_MID5: ZM5
ZM5: adjustment value of focus at zoom position middle5
(–173<=ZM5<=148)
AF_MID6: ZM6
ZM6: adjustment value of focus at zoom position middle6
(–180<=ZM6<=163)
AF_TELE: ZT
ZT: adjustment value of focus at zoom position tele
(–188<=ZT<=174)
Camera
Pattern box
3. AWB Adjustment
Preparation:
POWER switch: ON
Setting of pattern box:
Color temperature: 3100 ± 20 (K)
Luminance: 900 ± 20 (cd/m
2
)
Adjusting method:
1. When setting the camera in place, set it to an angle so that
nothing appears in any part of the color viewer except the
white section. (Do not enter any light.)
2. Double-click on the DscCalDi.exe.
3. Click the AWB, and click the Yes.
4. AWB adjustment value will appear on the screen.
5. Click the OK.
Dsc Calibration
x
OK
AWB Results:
1:
AGC=2466
WB=205,511,647
CHECK=127,128,124
WB_ND=204,511,651
CHECK_ND=127,128,123
IRIS_GAIN: 62
IRIS_OFFSET: 158
IRIS_PWM1=198,152
IRIS_PWM2=137,123
IRIS_PWM3=112,109
IRIS_PWM4=105
MS=3877,1219
MS_M=3107,2447
MS_C=2134,1699
MS_C2=1530,1412
MS_C3=1280
Copy
When all of the AWB adjustment screen
is not displayed, use a scroll bar.
DscCalDi x
OK
Focus Result
AF_TEMP_AD: 445
AF_WIDE: 9
AF_MID1: 11
AF_MID2: 15
AF_MID3: 25
AF_MID4: 26
AF_MID5: 24
AF_MID6: 19
AF_TELE: 17
!
To Next Page
Loading...
