129
English
DOCKING STATION
Connect to another device
<To connect to a computer or printer>
Use the supplied USB interface cable to connect the DIGITAL/AV terminal of
the docking station to the USB terminal of a computer or printer.
e Connect the dedicated USB interface cable to your computer’s USB
connector. Do not connect it to the USB port on your monitor or
keyboard, or to the USB hub. Be especially careful when installing the
driver software. In some instances, it may not be possible to correctly
install the driver software.
e Please refer to the included Sanyo Software Pack instruction manual
for information regarding operating your camera from a computer.
<To connect to a TV>
Use the supplied AV cable to connect the DIGITAL/AV terminal of the
docking station to the audio and video terminals of a TV.
e After connecting the camera to the television, set the TV input switch to
VIDEO input.
e The remote control unit can be used for playback.
e The playback method is the same as when viewing images on the LCD
monitor.
e The same playback procedure as when playing back with the camera is
used to play back audio recordings as well.
Supplied USB interface cable
To USB connector on the computer or printer
DIGITAL/AV terminal
$) !"#
To Next Page
Loading...
Need help?
General