K
Kirk FigueroaSep 8, 2025
Why does my Sanyo Xacti VPC-C1EX show no playback image?
- JJames SmithSep 8, 2025
If no playback image appears on your Sanyo Camcorder, make sure that the main switch is set to PLAY.
To Next PageTo Next PageWhy does my Sanyo Xacti VPC-C1EX show no playback image?
If no playback image appears on your Sanyo Camcorder, make sure that the main switch is set to PLAY.
Why does my Sanyo Xacti VPC-C1EX beep and not take self-timer pictures?
If your Sanyo Camcorder emits a warning tone (beep-beep-beep) and you cannot take a picture using the self-timer, the battery pack is likely consumed. Install a sufficiently recharged battery pack.
Why is part of the image missing on my Sanyo Xacti VPC-C1EX?
If a part of the image is missing when using your Sanyo Camcorder, the handstrap or a finger might be blocking the lens or lens opening. Hold the camera correctly and make sure the lens is not obstructed.
What does 'NO IMAGE' mean on my Sanyo Camcorder?
The “NO IMAGE” message on your Sanyo Camcorder indicates that there is no recorded data for the selected playback mode. To resolve this, capture images or make audio recordings before attempting playback.
How do I remove the 'PROTECTED' message on my Sanyo Xacti VPC-C1EX?
If the “PROTECTED” message appears on your Sanyo Camcorder and the data cannot be erased, it means you have attempted to erase data that is protected from accidental erasure. To resolve this, set the protect setting for the data to OFF.
Why doesn't the audio guide work on my Sanyo Camcorder?
If the audio guide does not sound on your Sanyo Camcorder, the audio guide setting is likely set to “OFF”. Set the audio guide setting to “ON.”
General| Type | Digital Camcorder |
|---|---|
| Optical Zoom | 5x |
| Storage | SD card |
| Frame Rate | 30 fps |
| Video Resolution | 640 x 480 |
| Battery Life | Approx. 60 minutes |
| Battery | Lithium-Ion |
| Image Sensor | 1/2.5-inch CCD |
