Sanyo Xacti VPC-CG65EX - To Select One Image and Print It (One Image)

155 English
DIRECT PRINTING
To select one image and print it (one image)
Procedure to select one still image and print it.
1 Complete the print preparations (page 153).
2 Select the print 1 image icon Y,
and press the SET button.
h The screen to select images for
printing appears.
3 Toggle the SET button to the left or
right to display the image you wish
to print.
h Specify the image to print.
4 Specify the number of prints.
1 Toggle the SET button up to select
“COPIES”, and press the SET
button.
2 Toggle the SET button up or down
to specify the number of prints.
3 Press the SET button.
h “PRINT” is selected.
5 Press the SET button.
h Printing begins.
HINT
To cancel printing
1 During printing, toggle the SET button down.
h The Confirm Cancel Printing Screen appears.
2 Select “CANCEL”, and press the SET button.
h If “EXIT” is selected and the SET button is pressed, printing resumes.
100-0009
PRINT 1 IMAGE
copy:1
EXIT
PRINT
COPIES OK
100-0009
PRINT 1 IMAGE
: 1
OK COPIES
copy
Number of prints