Sanyo Xacti VPC-CG65EX - Page 185

171 English
TROUBLESHOOTING
Viewing
images
The image is
too dark.
The flash was
blocked by a
finger or other
object.
Hold the
camera
correctly, and
make sure the
flash is not
obstructed.
37
The subject
was too far
away.
Capture the
image in the
range of
operation of the
flash.
180
The subject
was lit from
behind.
Set the flash to
the forced flash
mode, and take
the picture.
72
Use the
exposure
correction
function.
60
Use the spot
light-measuring
mode.
81
There is not
enough light.
Adjust the ISO
sensitivity
setting.
82
The video clip
picture is
flickering.
The video clip
was filmed
under
fluorescent
lighting.
Set the flicker-
reduction
setting to on. 133
Problem Cause Action
Reference
page