EasyManua.ls Logo

Sanyo Xacti VPC-CG65EX - Page 194

Sanyo Xacti VPC-CG65EX
206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English 180
Sensitivity Still image shooting mode (Standard output
sensitivity*):
Auto (ISO 50 to 400)/ISO 50, ISO 100, ISO 200,
ISO 400, ISO 800, and ISO 1600 (switchable from
the RECORDING MENU)
(Maximum ISO sensitivity increases up to 7200:
when scene select function is set to lamp Q)
* Sensitivity measured in compliance with the ISO
standard (ISO 12232:2006).
Video clip recording mode:
Auto (equivalent to ISO 450 to 3600)/equivalent to
ISO 450, ISO 900, ISO 1800, and ISO 3600
(switchable from the RECORDING MENU)
(Maximum ISO sensitivity up to 7200 variation:
when scene select function is set to lamp Q)
Minimum subject
illumination
Approx. 7 lux (when scene select is set to full auto
mode = and shutter speed is 1/30 sec)
Approx. 2 lux (when scene select is set to lamp mode
Q and shutter speed is 1/15 sec)
Image stabilizer Electronic (video clip recording mode or still image
playback mode only)
Monitor 2.5-inch (6.4 cm) amorphous silicon TFT color liquid
crystal display, transparent
Approx. 110,000 pixels (Frame coverage: Approx.
100%)
Flash working
range
GN = 3
Approx. 10 cm (3.94 in.) to 1.7 m (5.58 ft.) (Wide)
Approx. 80 cm (31.50 in.) to 1.3 m (4.27 ft.) (Tele)
Flash modes Auto-flash, forced flash, flash off
Focus TTL-type AF (9-point range finder/spot metering AF:
Still image shooting mode; Continuous AF/area: Video
clip recording mode), manual focus
Self-timer Approx. 2-second delay, 10-second delay
Ambient
environment
Temperature 0 to 40 °C (32 to 104°F) (operation),
–20 to 60 °C (–4 to 140°F) (storage)
Humidity 30 to 90%
(operating, no condensation)
10 to 90%
(storage, no condensation)

Table of Contents

Related product manuals