Sanyo Xacti VPC-S6 - Troubleshooting

English 134
TROUBLESHOOTING
Before taking your camera to the repair shop, check the following table for a
possible solution to the problem.
CAMERA
Problem Cause Action
Reference
page
Power
No power. The batteries
are dead.
Insert new
batteries.
15
The battery
has not been
inserted
correctly.
Reinsert the
battery, making
sure to orient it
correctly.
The battery/
card cover is
not completely
closed.
Close the
battery/card
cover
completely.
The camera
turns off by
itself.
The power
save function
is operating.
Press the ON/
OFF button,
shutter button,
playback
button, MENU
button or SET
button to turn
the camera on
again.
18
Shooting
An image is
not captured
when the
shutter button
is pressed.
The power is
not turned on.
If the power
save function
was activated,
turn the
camera on
before
shooting.
If the camera
was turned off,
press the ON/
OFF button to
turn it on.
18