67 English
SHUTTER OPERATION SETTING
ID photos
You can create ID photos to use in circulars, ads, and other publications, as
well as in identification documents.
1 Select the ID photo icon . from the operation mode menu, and
press the SET button.
2 Press the MENU button twice.
h The ID photo outline appears on
the LCD display.
3 Align the subject with the ID photo
outline, and snap the picture.
h After the preview screen for the
captured image appears, you are
returned to the Shooting Setting
Screen.
h Three images are shown in each of
two sizes on the Playback Screen.
CAUTION
Restrictions regarding sequential shots, composite photos, and ID
photos
i The k resolution setting is not available for sequential shots. In addition,
the flash cannot be used.
i The k resolution setting is not available for composite photos. In
addition, the macro + focus range is not available, and the self-timer
cannot be used.
i The k resolution setting is not available for ID photos. In addition, the
macro + and distant object ) focus ranges are not available.
12
<Playback Screen>
To Next Page
Loading...
