EN
Some of the camera functions can be accessed using the following shortcuts, as well as from the
Setting Screen menus.
Shooting mode
1Switch the display mode
Turn the guide display on
or off.
2Change the flash mode
(single shot mode only)
Change the way the flash
operates.
3Change the shooting mode,
or set the self-timer
Select the single shot
shooting mode, sequential
shots shooting mode, or
video clip recording mode.
The self-timer can be used in the single-shot
shooting mode.
4Change the focus range
Select the autofocus, macro or manual focus
mode.
Playback mode
1File delete
Delete the image or audio
file that is currently
displayed.
2File information display
Display the Playback Menu.
Press the button for at
least 1 second to show the
settings for the image or
audio file that is currently
displayed.
Press and hold the
playback button [
=
]
for at least 1 second.
The last recorded
image is displayed.
View other images.
Previous image:
Press the [] button.
Next image:
Press the [] button.
Watch a video clip.
Begin playback:
Press the SET button.
Stop playback:
Press the [] button.
Display the files that
you want to erase.
Press the [] button.
The screen to select
the delete mode
appears.
DELETE ALL: Erase all
the files from the card or
internal memory.
DELETE SINGLE:
Erase the currently
shown file.
EXIT: Return to the
Playback Screen.
Select a delete mode, and press the SET button.
The file is deleted.
If "DELETE ALL" was selected, a confirmation screen
appears. To delete the files, select "YES" and press the
SET button.
Even if you make a mistake, it's easy to erase the pictures you aren't
satisfied with. Unlike film cameras, with a digital camera you can take
all the photos you want, keep the ones you like and delete the rest.
Did your photos turn out the way you hoped?
STEP 4
ERASING FILES
STEP 3
VIEWING IMAGES
CAMERA SHORTCUTS
Press the playback button [
=
] to switch between the
Shooting Screen and the Playback Screen.
To switch to the Shooting Screen, press the
playback button [
=
].
3
2
1
2
1
1
2
1
2
3
6
4
5
5Scene select setting
The screen to set the scene select function
appears.
6Recording Menu display
Access the Recording Menu.
If you press and hold the button for at least one
second, the screen to change the monitor
brightness appears.
3
To Previous Page
Loading...
Need help?
General
