17
S4179705
Super long-life
filter
AFT-LSJ80T
AFT-LSJ140T
NAME QT’Y REMARKS
Cord with socket
1
Connecting line. Connect only when
(9P)
high-performance filter is used
Screw
4
Air-intake filter
(M5 × L125) (for fastening)
Screw
4+4
Duct connection flange/ box
(M4 × L12) (for fastening)
Duct connection box 1 (for fresh air)
Duct connection flange 1
(for connecting fresh air duct
)
Do not connect the
“accessory cord with
socket” to the electrical
component box when the
unit is used to take fresh air.
Do not connect the
“accessory cord with
socket” when assembling
the super long-life filter.
Always store the “accessory
cord with socket” inside the
electrical component box.
Installation steps (a) to (b) are the same for both
the CMB-GSJ80T and the GSJ140T. The drawing
illustrates installation of air-intake chamber to the
CMB-GSJ80T.
CAUTION
(3) INSTALLATION
(a) Setup for the indoor unit
●
When assembling the high-performance filter, open the lid of the electrical component box, remove the socket
(9P) of the fan motor cable inside the electrical component box and connect the accessory cord with socket (9P).
3-9. Duct for Fresh Air
● Air-intake chamber (including Duct connection box and flange) are attached to the indoor unit when used to
take fresh outdoor air.
High-performance filter or Super long-life filter can be also installed in the air-intake chamber.
(1) SETUP PRIOR TO INSTALLATION
● When installing the high performance filter or super long-life filter, the parts and parts numbers of filters to be
assembled with the air-intake chamber are listed below. Please check that the correct part numbers are
present.
(2) ACCESSORIES
● Check that the following parts are in the box when unpacking.
Fig. 3-16
Cord with socket
(9P)
Electrical
component box
1114_X_S
Air-intake
chamber
CMB-GSJ80T
(2432 Type)
CMB-GSJ140T
(3632 Type)
High performance
filter
AFT-MSJ80T
AFT-HSJ80T
AFT-MSJ140T
AFT-HSJ140T
To Next Page
Loading...
