Sanyo XHS3632 - Removing the Casing to Install the Indoor Unit

26 S4179705
3-16. Removing the Casing to Install the Indoor Unit
How to Remove the Casing
(1) Remove the plastic cover. (Fig. 3-48)
(2) Remove the clamp for the wiring connector.
(Fig. 3-49)
(3) Disconnect the 2 wiring connectors. (Fig. 3-50)
(4) Set the flap in the horizontal position. (Fig. 3-51)
(5) Remove the 3 screws. (Fig. 3-51)
(6) Remove the casing. (Fig. 3-51)
When replacing the casing, be careful not to crush
the lead wires between the casing and the frame.
(Fig. 3-51)
Fig. 3-49
Fig. 3-50
0947_T_I
Frame
Flap
Casing
Screws
Fig. 3-51
Wiring
connectors
0948_T_I
Fig. 3-48
Plastic cover
Screw
0945_T_I
Clamp
Screw
0946_T_I
NOTE