5
S4179705
Table 1-5 (Accessories for Outdoor Unit)
Part Name Figure Q’ty Remarks
Hexagonal Wrench 1
Grommet 1
Bushing 1
Installation Instruction 1
To open and shut the Narrow Tube Service Valve
For protecting refrigerant pipe by attaching to the edge
of Tubing Outlet
For protecting inter-unit control line by attaching to the
edge of wiring outlet
Table 1-3 KHS (Wall-Mounted)
Ta
For supporting the indoor unit
For insulation of the tubing of the indoor unit
For securing the indoor unit
For fixing the wall fixture
For determining the place where the indoor unit is
installed
For supporting the indoor unit
For fixing the wall fixture
For improved tubing appearance
For fixing the wall fixture
For insulation of the tubing of the indoor unit
Truss-head
Phillips
4 × 16 mm (5/8")
Truss-head
Phillips
4 × 25 mm (1")
Part Name Figure Q’ty Remarks
Wall fixture *1 1
Insulator *1 1
Mounting plate *1 1
Tapping screw *1 20
Full-scale diagram 1
Wall fixture *2 1
Rawl plug *2 10
Cover *2 1
Tapping screw *2 10
Insulator *2 1
Owner's manual 1
* 1 KHS3032, KHS3632 only
* 2 KHS2432 only
Table 1-4 (Accessories for the Wireless Remote Control Unit)
Part Name Figure Q’ty
1
2
Tapping screw 1
Tapping screw 1
AAA alkaline
battery
Wireless
remote control unit
Special
screw
5/8"(4 ✕ 16 mm)
TOTA
5/8"(4 ✕ 16 mm)