Wall Mounted Clock Mechanical Installation
13
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
8 9
8) Attach the housing to the gang box using the
#6-32x1 screws.
9) To proceed with the installation instructions,
please follow the “Uniform Stage Installation”
section in this manual. Once done, to complete the
wall mounted clock installation, follow the below
additional steps.
10
10) With the clock powered and properly functioning, the next step would be to remove the adhesive
clear protective film from the clock filter, as shown in the below image.
To Next Page
Loading...
