4 1-800-810-WIRE • www.sargentlock.com • A8203A
Copyright © 2016, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
04/30/16
IN220 Cylindrical Lock
General Description
2
Hardware Specifications
3
*UL testing was conducted on product powered by
UL Listed model 9001GR/AC injector; manufactured
by Microsemi Corp.
Electronic Specifications
4
• Input Power: PoE Class 1 Device, as defined by
IEEE 802.3af, requires less than 3.84 watts
over structured cabling
• Multiple time zone and holiday access scheduling
• First-in unlock or automatic unlock configuration,
based on specified time schedule
• 2,400 users per lock; 10,000 event audit trail
• Privacy button
• Power Requirements: 55VDC, 90mA
• HID
®
multiCLASS SE
®
technology offers support
for the following credentials:
• 2.4 GHz credential compatibility:
• 125 kHz credential compatibilty:
• HID Prox
®
• 13.56 MHz credential compatibility:
• iCLASS
®
• iCLASS SE
®
(SIO-enabled)
• iCLASS Seos
®
• SIO on MIFARE
®
Classic
• SIO on MIFARE
®
DESfire
®
EV1
• MIFARE
®
Classic
• DESfire
®
EV1
• NFC-enabled mobile phones
• Secure Identity Object
™
(SIO) on
Mobile IDs (Bluetooth Smart)
• UL 294 Access Control Performance Ratings:
Destructive Attack Level I
Line Security Level I
Endurance Level IV
Standby Power Level I
• UL Listed* - UL 294 Indoor Use
• CUL Listed - S319: Class 1
• Complete lockset with on-board memory
• ADA compliant
• Easily retrofits existing (cylindrical lock)
door preps
• Latch - 1/2” standard 3/4” throw fire-rated
double doors (optional) (41- prefix)
• Deadlocking latch - Stainless steel, non handed
• Lock furnished for 1-3/4” doors.
For other thicknesses, consult factory.
• May be used for indoor and outdoor applications
• ANSI/BHMA A156.25 Listed Grade 1 Compliant
• Outside lever controlled by contactless reader
or mechanical cylinder
The SARGENT IN220 Cylindrical lock combines superior aesthetics with the energy efficiency and
streamlined architecture of Power-over-Ethernet (PoE) access control. PoE-enabled access control
allows facilities to leverage existing network infrastructure for enhanced security and easier, more
cost-effective installations. Featuring multiCLASS SE
®
technology, it supports multiple credential
types, including mobile devices, for a future-proof solution that is convenient and secure.
NOTE: A weather-protective gasket is required for outdoor applications.
To Next Page
Loading...
