Sargent IN120 - User Manual

A8151D
03/15
Copyright 2015, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Sargent Manufacturing Company is prohibited.
WiFi
Mortise Lock
Installation Instructions
IN120

Summary

General Description

Hardware Specifications

Electronic Specifications

Parts Breakdown

Lock Installation

Verify Hand and Bevel of Door

Instructions on how to determine the correct hand and bevel for door installation.

Door Preparation

Details the necessary steps for preparing the door for lock installation.

Prepare Lock Body

Reverse Lock Hand (If Required)

Steps to reverse the lock's hand orientation if necessary.

Reverse Latch Hand (If Required)

Instructions for reversing the latch hand to match the door's bevel.

Install Door Position Switch (DPS)

Install Lock Body

Outside Cylinder Installation

Assemble Outside Trim

Install Inside Rose and Inside Lever Assembly

Install Thumb Turn

Attach Front Plate

Outside Reader Installation

Installation of Connectors

Details how to connect the reader, DPS, and lock body using various connectors.

Secure Mounting Plate

Instructions on securing the mounting plate and reader assembly to the door.

Installing the Controller

Battery Installation

Inside Cover Installation

Operational Check

Sargent IN120 Specifications

General

Lock Type	Mortise
Backset	2-3/4"
ANSI Grade	Grade 1
Handing	Reversible
Door Thickness	1-3/4"
Keyway	Schlage C